Properties: Reduces water evaporation to less than relevant ASTM standards Economical. Eliminates water curing. By reflecting sunlight it reduces concrete temperature and hence cracking of concrete.
Application Method: To be applied by spray on fresh (Green) concrete/plaster before final set. (Just after evaporation of surface water)
Coverage: 3.25 square meter per litre for vertical areas and 4 square meter per litre for horizontal areas.
Application: Dilute 1 Litre with 10 Litre diesel to get 11 Litres of mould release agent. Very economical. Easy to store / handle.
Application Method: Dilute with diesel in the ratio of 1:10 and then apply on form work by brush / waste cotton before placing concrete.
Coverage: 2500 to 4000 Sq Ft. per litre depending on the surface.
Application Area: It is a water based shutter release agent for wooden or metallic shutters.
Application Method: Dilute with water in the ratio of 1:5 before use. Apply the diluted Algiformcoat E-SP to the face of formwork by brush or sponge. Apply only one coat.
Coverage: 1 litre of Algiformcoat E-SP concentrate gives 1000-1200 ft2 after 1:5 dilution in water.